If access to land difficult to check the car to shop, the noise emitted belt or any belt pull loads that do not complete the task. It is not easy to determine how much the belt tension is correct by certain wire often cap or cover some other details. But if the belt loose, it will squeak when the vehicle suddenly accelerated.
Equipment check belt tension.
The tension created by the spring, so find out before structural adjustment to avoid the unfortunate injury. In situations requiring adjustments to disassemble other details, using specialized equipment or you feel too risky, then you need to car repair professional.
Check the belt
If you can set the title to 1.5 cm deep while everything else is fine, the need to adjust the belt tension. Bottle belt surface or oily ball will create less traction with pulleys. The performance of the belt reduction drive. The engine may overheat due to water main pump or air compressor to cool deep as weak. This is the time you need to replace the belt.
Tighten the belt appears many cracks, frayed surface, it can tear stick too closely to the pulley or one of the pulleys has shifted. The belt is rather obvious, but before that check and adjust the pulley.
Besides insufficient cause tension, hissing belt can stick by water, brake fluid, power steering oil, coolant ... If in contact with water, check the water pump, and pipes to overcome the gap, the water will dry down straps. But if the sale of oil or coolant stick it needs replacing.
No comments:
Post a Comment